Settings
43
When you switch on the power of the phone or open
the clamshell, the keypad backlight is on, and the
screen is powered at the maximum level.
You can activate or de-activate the light sensor.
Backlight
Allows you to choose from different backlight
durations.
External LED
The handset has an external LED, you can activate or
de-activate it.When on, by default the light will blink,
it will indicate that the phone is on. It also lights up
when one of the following event occurs :
• The alarm rings.
• There is a new SMS, a new MMS, a new organizer
event, a new voice mail, or a missed call.
• There is an incoming call.
• A SMS, MMS, organizer event, voice mail, or
missed call has not been read.
• The battery is low (red light).
Security
This menu allows you access the features
relating to the security of your mobile phone
and the data you store there.
Change codes
Allows you to change your
PIN
and
PIN 2
codes, as well
as the call Barring code. Depending on your SIM
card, some features or options may require a PIN2
secret code given to you by your operator.
If you enter a wrong PIN2 code 3 times, your SIM
card is blocked. To unblock it, request the PUK2 code
from your operator or retailer. If you enter an
incorrect PUK code 10 times in a row, the SIM card
will be blocked and unusable. If this happens, contact
your operator or retailer.
PIN protection
This allows you to set the PIN protection
On
or
Off
.
When
On
, you will be asked to enter your PIN code
when switching your phone on.
You cannot change your PIN code if this option is
Off
.
Public names
Allows you to manage a specific names list called
Public
Names
list, and restrict calls to this list via the
Call
restriction
option.
This feature is subscription dependent and requires a
PIN2 code (see page 43).