7
Getting
started
2
Plug the transformer unit into a main AC power socket with easy access. The
b
symbol indicates the state of charge:
•
During charging the 4 charge indicators change; Each bar represents 25%
of charge.
•
When all 4 bars are steady the battery is fully charged and you
can disconnect the charger
.
•
When the battery is charged, remove the connector by pressing the
release button on top of the connector.
Keeping the charger plugged to the mobile when the battery is fully charged doesn’t
damage the battery.
3
To optimise battery capacity, you should allow the battery to fully discharge
every now and then. In this case, consider that a period of about 1hr40mn
charging is required to fully recharge a completely discharged battery.
4
If you don’t use your phone for several days, we recommend you to disconnect
the battery.
Notes:
•
You can use the phone while charging.
•
The only way to turn the battery charger off is to unplug it from the mains outlet;
for this reason use a mains outlet with easy access.
•
You can connect the charger to an IT supply (Belgium only).
•
If the battery is completely flat, the battery icon will only reappear after 2 or 3
minutes of charging.
Removing the battery
1
Remove the battery cover.
2
Unplug the connector from its slots.
3
Lift the top of the battery out of the phone and slide it out.
Fisio311InFusio_GB_4311 255 51811.book Page 7 Mercredi, 8. août 2001 1:38 13
Содержание CT2888
Страница 1: ......