12
System requirements:
• Windows XP (SP2 or higher)
• Pentium Class 300MHz processor or higher
• 128MB RAM
• 500MB hard disk space
• Internet connection (preferable)
• Microsoft Internet Explorer 6.0 or later
• USB port
1
Insert the CD supplied with your product into the CD ROM drive of your PC.
2
Follow the on-screen instructions to complete the installation of
Windows Media
Player
and
Philips Device Manager
.
3
If the installation program does not start automatically, browse the CD contents with
Windows Explorer
and run the program by double clicking on the file ending with .exe.
Lost your CD? Don’t worry, you can download the CD contents from
www.philips.com/support
.
3.3 Connect
3.3.1 Insert the battery
3.3.2 Read the battery level indication of your player
The approximate power levels of your battery are indicated as follows:
Full
Two-thirds full
Half full
Low
Empty
Note
When the batteries are almost empty, the low battery screen
blinks. Your
player will power down in less than 60 seconds. Your player will save all settings and un-
finished recordings before it powers down.
1
Remove the battery door
by sliding it in the
direction of arrow.
2
Insert the supplied AAA
battery into the battery
compartment.
3.2 Install
Important
Make sure to install the software provided in the supplied CD for music
transfer.
