Philips Cineos DFR9000, Инструкция по эксплуатации

Страница: 42 / 50

42 ENGLISH
Playback problems Possible cause Solution
A source is selected but no sound is heard. Volume at minimum level. Adjust the volume.
Source not connected to correct Check if source is connected to correct
input socket or input socket input socket or reassign the input socket.
is reassigned for another source.
Headphones are connected. Disconnect headphones.
Wrong source selected. Select correct source.
'Mute' (11) activated. Disable 'Mute' (11).
Source is not playing. Start playback on source.
Speakers are not (properly) Connect speakers (properly).
connected.
A connected source cannot be selected. Audio and video for the source are Select (assign) input socket(s) for the source.
set to 'None' in the 'A/V input' menu. See '10.7 A/V input menu'.
No digital surround sound available. The inserted disc or the selected Use another disc or select another source.
source does not support digital
surround sound.
No surround mode selected. Select surround mode. See '9. Surround modes'.
No sound or poor sound when playing SACDs Speaker settings of source device Make sure speaker setup of source device is the same
on your SACD player (or other analogue and receiver not the same. as receiver speaker setup.
multichannel source device).
No sound or poor sound when playing regular Receiver outputs the signal Make an additional audio connection so receiver
CDs or DVDs on your SACD player via the wrong outputs. can use this connection to output the CD/DVD signal.
(or other analogue multichannel source device).
Recording problems Possible cause Solution
Recording from a specific recording device Wrong input socket selected in Select input socket to which recording devices' output
not possible (only valid for audio sources). 'Configuration' menu. socket is connected. See '7.5 Selecting input sockets
for recording' and and '10.1 Configuration menu',
sub-menu 'Rec audio'.
No digital recording possible via The sampling frequency is not Make sure the digital recording device can handle
DIGITAL OUT (28). accepted by the digital recording sampling frequencies between 32 kHz and 48 kHz
device. or make the recording via one of the analogue outputs.
Content copy protected.
Whole recording appears as one track when The DVD player does not provide Record each track individually.
recording from DVD disc. track information.