How to search for and store TV channels (Continued)
EN
29
Info
TV menu
Installation
Channels
Autom. installation
Installation update
Digital: test recept..
Analogue: manual..
Rearrange
Languages
Country
Time zone
Channels
Preferences
Connections
Decoder
.............
Analogue: manual installation
This gives you the possibility to manually install (tuning-in
channel by channel) analogue channels. Manual installation
will not find nor store any DVB-T (digital) channels.
1. Select
Analogue: manual installation
and press the
cursor right.
2. Select
System
.
3. Select your country or part of the world where you are
now located.
4. Select
Search
and press the cursor right.
5. Select the red or green colour key to proceed.
6. Press the cursor left to store the channel found or to
search for another channel.
7. Select
Fine tune
and press the cursor right.
Fine tuning can be useful when the frequency has shifted a
bit or when interference of another frequency occurs.
Adjust the frequency with the cursor up/down in case of
poor reception of the channel found.
8. Select
Store current channel
if you want to store the
(fine tuned) frequency under the current channel number.
Press the cursor right and confirm with the
OK
key.
Select
Store as new channel
if you want to store the
(fine tuned) frequency under a new channel number.
Press the cursor right and confirm with the
OK
key.
9. Use the rearrange menu to rename or reshuffle the
channels. See next page.
Note
: when on a frequency where a DVB signal is
broadcasted, the tuner will try to decode an analogue TV
channel, and hence will not show video.
Tip
: if you know the frequency, enter the 3 digits of the
frequency with the digit keys 0 to 9 (For example, 049).
Digital: test reception
(only with Digital TV broadcasting)
This allows you to see the quality and the strength of the
signal reception for a digital frequency.This enables you to
find the antenna position that gives the best reception.
<
Select
Digital: test reception
and press the cursor right.
>
You obtain an indication of the actual channel frequency,
the network name, the signal quality and strength.
>
If the signal quality and strength is poor, you can try
repositioning the aerial.
Tip
: it is however advisable to contact a specialised aerial
installer in order to achieve the best results.
You can also directly enter the frequency of the digital
channels you want to test.
Info
TV menu/Installation
Channels
Analogue: manual..
System
Search
Fine tune
Store current chan.
Store as new chan.
Automatic install...
Installation update
Digital: test recept.
Analogue: manual..
Rearrange
