Philips Cinema 50PFL7956, Руководство пользователя

Страница: 14 / 86

Red colour key 14
.To open interactive TV or to select a Text page
Green colour key 15
.To open the Eco settings or to select a Text page
Yellow colour key 16
.To select a Text page
Blue colour key 17
.To select a Text page
Number keys and text keypad 18
.To select a TV channel directly or to enter text
Exit 19
To exit MHP. / Keep this key pressed for 3 seconds to open or
.close the Format menu
Teletext / Info 20
To open or close text. / Keep this key pressed for 3 seconds to
.open or close information on next programmes
Operate devices
The remote control of the TV can also operate a connected
device. The device must have EasyLink (HDMI-CEC) and have it
switched on. The device must also be connected with an HDMI
.cable
Operate an EasyLink device
To operate such a device with the TV remote control, select the
device -or its activity- in the
h
Home menu and press OK .
The commands of all keys, except the
h
key, the
t
ADJUST
.key and the
r
OPTIONS key, are forwarded to the device
Switch back to TV
To switch the remote control back to operate the TV, press
h
.(Home) and select Watch TV and press OK
Show device keys
When operating a device, some of the keys might not be
available on the TV remote control. To make these keys
selectable on TV, press
r
OPTIONS and select Show device
. keys . Select the key you need and press OK
.(To hide the device keys, press
È
(Back
:In general, these keys open the following device menus
Home menu 1
Setup menu
2
(Disc menu (disc content
3
Pop-up menu
4
Options menu 5
Programme guide 6
Media selection 7
One Touch Play
Insert a disc into an EasyLink HDMI-CEC device and press Play
on the device. The TV switches on from standby and starts
.playing the disc
System Audio Control
If you connect an EasyLink audio system, you can listen to the
audio from the TV through the audio system. The TV speakers
are muted automatically. You can control the volume of the
.audio system with the TV remote control
Surround mode
With recent Philips devices, you can change the surround sound
setting of the device on the TV. To change this setting, press
t
ADJUST , select Surround mode and press OK . On Next mode ,
.press OK to toggle through the available modes on the device
Smart sound
With recent Philips devices, you can change the Smart sound
setting of the device on the TV. To change this setting, press
t
ADJUST , select Smart sound and press OK . Select a sound
.mode from the list
Screen off
If a recent Philips audio device only sends audio to the TV, the
device may suggest switching off the TV screen. To switch off
the screen when this message appears, select Screen off and
.(press OK . To switch the screen back on, press
h
(Home
System Standby
Press
O
on the remote control to switch the TV and all
.EasyLink devices to standby
Read more about EasyLink in
Help
>
Setup
>
Devices
>
.
EasyLink HDMI-CEC
IR sensor
Always make sure you point the remote control at the remote
.control infrared sensor on the front of the TV
14 Basics / Remote control