28
11 Product
information
Note
Product information is subject to change without
prior notice.
General
Power supply
12 V DC (11 V - 16 V),
negative ground
Fuse
15 A
Suitable speaker
impedance
4 - 8
Maximum power
output
50 W x 4 channels
Continuous power
output
24 W x 4 channels
(4 10% T.H.D.)
Pre-Amp output
voltage
2.0 V ( CD play mode;
1 kHz, 0 dB, 10 k
load)
Subwoofer output
voltage
2.0 V (CD play mode,
61 Hz, 0 dB, 10 k
load)
Aux-in level
500 mV
Dimensions
(W x H x D)
178 x 100 x 160 mm
Weight (main unit)
2.5 kg
Disc player
System
DVD / CD audio /
MP3 system
Frequency response
20 Hz - 20k Hz
Signal/noise ratio
>75dB
Total harmonic
distortion
Less than 1%
Channel separation
>55dB
Video signal format
NTSC only
Video output
1 +/- 0.2V
Replace fuse
If there is no power, the fuse may be damaged
and need to be replaced.
1
Take out the unit from dashboard.
2
Check the electric connection.
3
Buy a fuse that matches the voltage of the
damaged fuse (15A).
4
Replace the fuse.
If the fuse gets damaged immediately after it
has been replaced, there may be an internal
malfunction. In such case, consult your Philips
dealer.
EN
