Philips CEM2300BT, Руководство пользователя

Страница: 8 / 26

6 EN
t
/
• Tune to a radio station.
• Press to skip to the previous or next
track.
• Press and hold to rewind a track or
search fast forward.
u
• Press to hang up an ongoing call.
• When there is an incoming call, press
to reject it.
• When it is not in a call, press to enable
or disable the MAX Sound feature.
v
• When there is an incoming call, press
to answer.
• Press and hold to redial the last called
number.
• In a call, press and hold to transfer the
voice between the phone and the car
speakers.
w
RESET
• Press to reset the system to factory
default settings.
3 Install the car
audio system
Caution
•
Use the controls only as stated in this user manual.
Always follow the instructions in this chapter in
sequence.
These instructions are for a typical installation.
However, if your car has different requirements,
make the adjustment accordingly. If you have
any question regarding installation kits, consult
your local retailer.
Note
•
This system is designed for negative ground (earth) 12V
DC operation only.
•
Always install this system in the car dashboard. Other
locations can be dangerous as the rear of the system
heats up during use.
•
To avoid short-circuit: before you connect, make sure
that the ignition is off.
•
Make sure that you connect the yellow and red power
supply leads after all other leads are connected.
•
Make sure that all loose leads are insulated with
electrical tape.
•
Make sure that the leads do not get caught under
screws or iron parts that will move (e.g. seat rail).
•
Make sure that all ground (earth) leads are run to a
common ground (earth) point.
•
Use only the supplied mounting hardware for a safe
and secure installation.
•
Improper fuses can cause damage or fire. When you
need to change the fuse, consult a professional.
•
When you connect other devices to this system, make
sure that the rating of the car circuit is higher than the
total fuse value of all the connected devices.
•
Never connect speaker wires to the metal body or
chassis of the car.
•
Never connect speaker wires with stripes to one
another.