13
English
EN
Connector
Connect to
4
Red wire
The +12V power terminal
which is live in the accessory
(ACC) position of the ignition
switch. If there is no accessory
position, connect to the
+12V car battery terminal
that is always live. Ensure that
black ground (earth) lead is
connected to a metal surface
5
Green and
green/black
wires
Left speaker (Rear)
6
White and
white/black
wires
Left speaker (Front)
7
Gray and
gray/black
wires
Right speaker (Front)
8
Purple and
purple/
black
wires
Right speaker (Rear)
2
Connect the other end of the supplied
standard connector to the car audio
system.
Caution
To avoid any accident, the driver must not watch video
while driving. This unit is designed to not allow watching
moving video while driving. Park your car in a safe place
and engage the parking brake before watching moving
video.
Note
The video blocking system under parking brake not
engaged only control the display of this unit, and will
not affect the video output through the rear RCA
video output.
If watch moving video from disc or AV-IN source but
parking brake is not properly connected, the video
signal will be blocked by the system, and the below
display will be shown on TFT:
