Philips CED380, Руководство пользователя

Страница: 12 / 35

11
EN
Mount into the dashboard
Note
•
If your car has no an on-board drive or navigation
computer, disconnect the negative terminal of the car
battery.
•
If your car has an on-board drive or navigation
computer, the computer may lose its memory when
you disconnect the car battery.
•
If the car battery is not disconnected, to avoid short-
circuit, make sure that bare wires do not touch each
other.
1
Make sure that the car dashboard opening
is within these measurements.
2
Remove the two transport screws on the
top of the unit.
183 mm
53mm
5mm
3
Remove the sleeve from the unit.
4
Install the sleeve into the dashboard and
bend the tabs outward to fix the sleeve.
Note
•
If the system is not fixed by sleeve but by the supplied
screws, skip this step.
183 mm
53.5 mm