15
Englis
h
EN
8
Reconnect the negative terminal of the car
battery.
Install remote control battery
Caution
Risk of explosion! Keep batteries away from heat,
`
Risk of decreased battery life! Never mix different
brands or types of batteries.
Risk of product damage! When the remote control is
not used for long periods, remove the batteries.
Perchlorate Material - special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate.
1
Remove the protective tab to activate the
remote control battery.
To replace t
h
e remote control battery:
1
Open the battery compartment.
2
Insert <00_RC_Battery_Quantity> <00_
RC_Battery_Type> batteries with correct
polarity (+/-) as indicated.
Close the battery compartment.
Turn on
1
Press the knob to turn on the unit.
»
The unit plays the last listened
program: DVD, Tuner, USB or SD/MMC
Card (if there is USB device or SD/
MMC card connected).
To turn off the unit, press the knob for
more than 2 seconds.
When the unit is idle for over 3 minutes, it
goes to standby mode and displays screen
saver.
Select
d
isplay language
English is the default language for screen display.
You can change the display language.
1
Press
MENU
.
»
The main menu is displayed.
2
On the remote control, press the
navigation buttons to select
[SETTINGS]
,
then press
SEL
»
The setting menu is displayed.
3
Select
[LANGUAGE]
>
[OSD Lang]
.
4
Select the language, then press
SEL
.
5
Press to exit.
⁚㇂Ŷဟ
Español
Português
Pyccknñ
