Philips CE120, Руководство пользователя

Страница: 12 / 30

12
Connector Connect to
1 Black wire
A metal surface of the car
First connect the black
ground (earth) lead, then
connect the yellow and red
power supply leads.
2 Blue wire
The electric antenna
control lead or power
supply lead of the antenna
booster
If there is no electric
antenna or antenna booster,
or it is manually operated
telescopic antenna, it is not
necessary to connect this
lead.
3 Yellow wire The +12V car battery
which is live at all times
.
4 Orange/
White
illumination switch
.
5 Red wire The +12V power terminal
which is live in the
accessory (ACC) position
of the ignition switch
If there is no accessory
position, connect to the
+12V car battery terminal
that is always live. Be
sure to connect the black
ground (earth) lead to a
metal surface of the car
fi rst.
6 Green and
green/black
wires
Left speaker (Rear)
7 White and
white/black
wires
Left speaker (Front)
8 Gray and
gray/black
wires
Right speaker (Front)
9 Purple and
purple/black
wires
Right speaker (Rear)
2
Check the car’s wiring carefully and
connect them to the supplied standard
connector.
1
3
2
4
5
6
7
8
9
1
3
2
4
5
6
7
8
9
ENG
CE120_IFU_ENG.indd Sec1:12 CE120_IFU_ENG.indd Sec1:12 2008-10-10 14:37:16 2008-10-10 14:37:16