GB 21
3.
CDR600
Directions for Use
Search
1
Hold down
5
or
6
(in Play mode).
➜
The player first searches backwards or forwards at
10 times normal speed with sound at low volume,
then goes to 5
0
times normal speed with sound
muted.
2
Release the button at the desired passage.
➜
Play will start at the desired passage.
Note: During Shuffle, Repeat Track or Programmed play, search
is restricted to within the track being played at the time.
Shuffle (random order) play
1
Press SHUFFLE before or during CD play to start shuffle
play.
➜
The tracks on the CD (or program if set) will play in
random order.
2
Press SHUFFLE again to return to normal CD play.
➜
CD recorder goes to Stop mode.
Note: Shuffle is also cleared when you open the disc tray.
Repeat CD, track or program
1
Press repeat one or more times during CD play.
➜
When
REPEAT TRACK
lights up, the current track will
play repeatedly. When
REPEAT ALL
lights up, the entire
disc or program plays repeatedly.
2
To return to normal play, press REPEAT one or more times
until:
➜
The
REPEAT
text disappears from the display.
Note:
You can use shuffle in combination with
REPEAT ALL
or
programmed play.
REPEAT
is also cleared when you open the disc tray.
Programming tracks
0
You can program up to 99 tracks to play in any desired
sequence.
0
Tracks can be programmed more than once, but each time
counts as a track (
STEP
).
Programming
1
In Stop mode press PROGRAM to enter Program mode.
➜
PROG
flashes and
PROGRAM
followed by track
information appears on the display.
2
Select the desired track numbers by turning the EASY
JOG/ENTER key left or right and store by pressing ENTER.
or:
Key in a track number with the number keys and press
ENTER to confirm. For 2-digit numbers, press the keys in
rapid succession.
➜
The track will be stored in the program.
➜
The track number, total program time and the number
of programmed tracks (
STEPS
) are displayed.
3
Repeat step
2
for all tracks to be programmed.
4
Press STOP
9
or PROGRAM to end programming.
➜
PROG
lights continuously.
5
Press PLAY/PAUSE
2;
to start programmed play.
Note:
To review the program, press PROGRAM, followed
by
5
or
6
with the CD recorder in Stop mode.
To add more tracks to the program, repeat steps
1
to
5
.
If you try to store more than 99 tracks,
PROG FULL
will
appear on the display.
Clearing a program
1
Press STOP
9
if necessary to stop programmed play.
2
Press STOP
9
again to clear the program.
➜
PROG
will disappear from the display.
0
The program is also cleared when you open the disc tray.
Erasing a track from a program
1
In Stop mode press PROGRAM to enter Program mode.
2
Use
5
or
6
to select the track from to be deleted.
➜
The track number and program step will be shown on
the display.
3
Press CANCEL/DELETE to erase the track from the
program.
➜
The remaining program steps and the remaining
playing time on the program will be displayed.
EASY JOG STORE/MENU CANCEL/DELETE
Playing
24
English
