26
Use more of your phone
5.10.3 Answer an external call
during intercom
When there is an incoming external
call during an intercom, a new call
tone is emitted.
To end the intercom and answer the
external call, press
e
. The handset
will ring. Press
r
to answer the
external call.
• Connection with the external call is
established.
Tip
To put the internal call on hold and
answer the incoming external call, press
r
key.
5.10.4 Switch between an internal
and external call
To switch between an internal or
external call, press
c
key.
5.10.5 Establish a three-party
conference call
The conference call feature allows one
external call to be shared with two
handsets (in intercom). The three parties
can share the conversation and no
network subscription is required.
During the call, press
c
key to
put the external call on hold (the
caller can no longer hear you).
• Intercom is established immediately
if there are only 2 registered
handsets.
If there are more than 2 registered
handsets, the handset numbers
which are available for intercom will
be displayed. Scroll
:
to the
specific handset you want to call and
press
m
SELECT
.
• The called handset rings.
Press
r
key on the called handset
to answer the internal call, where
both internal callers can talk.
• Intercom is established.
Press and hold
c
key for 2
seconds on the first handset to start
the three-party conference.
•
CONFERENCE
will be displayed on
the screen once the conference call
is established.
Tip
If
CONFERENCE
mode is activated (see
“Activate/Deactivate Conference mode”
on page 32), a three-party conference call
is automatically established if the second
handset takes the line when there is
already an external call in progress.
5.11
Paging
The paging feature enables you to locate
a missing handset if the handset is in range
and contains charged batteries.
Press
p
key on the base station.
• All the registered handsets start to
ring.
Once retrieved, press any key on
the handset to end the paging.
Note
If there are no key presses within 30
seconds, the handset and base station will
automatically return to idle mode.
Tip
To stop paging, press
p
key on the base
station again.
1
2
1
2
3
4
1
2
CD650_IFU_EN_UK.book Page 26 Monday, June 23, 2008 3:42 PM
