Getting started
11
3
Getting started
3.1
Connect the base station
Place the
base station in a central
location near the telephone line
socket and electricity socket.
Connect the line cord and the power
cable to their corresponding
connectors at the bottom of the base
station as shown.
Connect the other end of the line
cord to the telephone line socket
and the other end of the power
cable to the electricity socket.
Note
The line adaptor may not be attached to
the line cord. In this case, you have to
connect the line adaptor to the line cord
first before plugging the line cord to the
line socket.
Warning
Avoid placing the base station too close
to large metal objects such as filing
cabinets, radiators or electrical
appliances. This can impair the range and
sound quality. Buildings with thick internal
and external walls may impair
transmission of signals to and from the
base.
Warning
The base station does not have an ON/
OFF switch. Power is applied when the
power adaptor is plugged into the unit
and connected to the electricity socket.
The only way to power down the unit is
to unplug the power adaptor from the
electricity socket. Therefore, ensure that
the electricity socket is easily accessible.
The power adaptor and telephone line
cord have to be connected correctly, as
incorrect connection could damage the
unit.
Always use the telephone line cord
supplied with the unit. Otherwise, you
may not get a dial tone.
3.2
Wall mounting the base
The base is designed to support wall
mounting. To wall mount the base, follow
the instructions below.
Warning
Other wall mounting methods are not
recommended and may damage the
product.
Remove the bracket from the back
of the base station.
1
2
3
!
!
!
1
CD650_IFU_EN_UK.book Page 11 Monday, June 23, 2008 3:42 PM
