Philips CD1351S, Руководство пользователя

Страница: 31 / 46

31
EN
To set or change an SOS number
The SOS number feature allows you to enter 3 SOS phone numbers, which can be dialed
out although the call barring is activated. The maximum length of an SOS number is 4
digits. The PIN code is required when modify the SOS number.
1. Press and press Down to reach ADVANCE SET .
2. Press and press Down to reach SOS NUMBER .
3. Press and enter the PIN code (by default the PIN code is 0000).
4. Press , scroll to select the SOS number location 1 , 2 or 3 and press
.
5. Enter the SOS number (max. 4 digits) and press to confirm.
To register a handset
Up to 5 handsets can be registered to the base station.
If you have inadvertently unregistered your handset, you can register it again. Additional
handsets must be registered to the base before use.
To register a handset, first press the paging key on the base for approx. 5 seconds
when the base is in idle mode. Then carry out the following steps on the handset within
one minute :
1. Press and press Down to reach ADVANCE SET .
2. Press and press Down to reach REGISTRATION .
3. Press , enter the PIN code (by default the PIN code is 0000) and press
to confirm.
If the registration was successfull, a long confirmation tone is heard and the handset
number (1 to 5) will be assigned by the base automatically.
Warning : If you wish to register non Philips handsets to the CD 135 base station,
make sure that this handset is GAP compliant otherwise it will not operate properly
(see page 11).
Advanced settings