10
EN
9 Product
information
Note
•
Product information is subject to change without prior
notice.
General information
Power Supply
(through USB socket)
5V, 0.6A
Built-in Battery
Lithium battery
Dimensions - Main Unit
(W x H x D)
107 x 73 x 53
mm
Weight - Main Unit
0.118 kg
Bluetooth
Bluetooth
specification
V2.1+EDR
Supported
profiles
HFP v1.6, AD2P v1.2, HSP v1.2
Range
10 m (Free space)
Amplifier
Rated Output Power 1.2 W RMS
Signal to Noise Ratio
> 62 dBA
AUX Input
600 mV RMS, 22 kOhm
10 Troubleshooting
Warning
•
Never remove the casing of this product.
To keep the warranty valid, never try to repair
the product yourself.
If you encounter problems when using this
device, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips Web page (www.
philips.com/support). When you contact the
Consumer Care, make sure that the product
is nearby and the model number and serial
number are available.
General
No power
• Recharge your speaker.
No sound
•
Adjust volume on this product.
•
Adjust volume on the connected device.
•
When you listen to audio through
Bluetooth, make sure that no audio input
cable is connected to the
AUX
socket.
•
Make sure that your Bluetooth device is
within the effective operational range.
No response from the speaker
•
Restart the speaker.
About Bluetooth device
The audio quality is poor after connection
with a Bluetooth-enabled device.
•
The Bluetooth reception is poor. Move the
device closer to this product or remove
any obstacle between them.
