Rev :
Type :
Date :
Brand :
Page :
0.1
221V2
21.5” Wide FHD LCD Monitor
2009/11/10 PHILIPS 15 of 24
5. Mechanical characteristics
5.1 Cosmetic -
Philips ID
5.2 Mechanical data files -
Pro-E files required
5.3 Location of Philips logo -
Per Philips make-up sheet
5.4 Gap between panel and front bezel
< 1.2mm
(Typ.)
5.5 Location of Control icons -
Per Philips Graphic sheet
5.6 Color for resin/paint –
Per Philips make-up sheet
5.7 Fire enclosure request-
Shielding Cover should fulfill international standard
5.8 Resins
•
RoHS required
•
WEEE required.
•
Resin type/selection refer to Project Book Section 7.2 Plastic material.
5.9 If paint is used
•
RoHS required
•
WEEE require
•
If new painting type need to implement, refer to UN-D 1235.
5.10 Plastic mold tooling
•
Tooling to be designed to minimize cosmetic defects induced by molding
process (sink, blush, weld lines, gate marks, ejector marks, etc.). Refer to “TYV61-
90007”.
•
Painting to cover up cosmetic defects due to molding is strongly discouraged.
•
China RoHS mark requested.
Содержание C221V2SB/01
