Philips C221V2SB/01, Руководство по обслуживанию

Страница: 123 / 157

Rev :
Type :
Date :
Brand :
Page :
0.1
191V2 18.5” LCD Monitor
2009/07/15 PHILIPS 17 of 26
5.10 Plastic mold tooling
•
Tooling to be designed to minimize cosmetic defects induced by molding process (sink,
blush, weld lines, gate marks, ejector marks, etc.). Refer to “TYV61-90007”.
•
Painting to cover up cosmetic defects due to molding is strongly discouraged.
•
China RoHS mark requested.
5.11 Plastics flammability
•
All Plastics to be Flame Retardant UL 94-HB.
•
Base / Rear to be Flame Retardant UL 94-HB.
•
All major plastic parts (bezel, back cover) need to be molded from same resin.
•
Plastic resin type selection should be referred to “plastic-Philips Pool monitor”.
5.12 Texture/Glossing of housing
•
The texture area and texture no should follow Philips make-up sheet.
•
The exterior surfaces shall have a uniform texture.
•
Philips must approve the mold texturing.
•
Detail document for texture refer to “UN-D249”, “UN-D 600”.
•
> = 80 gloss units