8
EN
6 Product
information
Note
•
Product information is subject to change without prior
notice.
Specifications
Amplifier
Rated Output Power
MAX 2 X 6 W RMS
Signal to Noise Ratio
> 62 dBA
AUX Input
600 mV
Bluetooth
Bluetooth version
V3.0
Supported profiles
HFP v1.6, A2DP v2.1,
AVRCP v1.0
Range
10 m (Free space)
General information
Power Supply (through
USB socket)
5 V 1 A
Built-in Battery
Li-polymer battery
(3.7 V, 2200 mAh)
Dimensions - Main
Unit (W x H x D)
201 x 101 x 35 mm
Weight - Main Unit
0.5 kg
7 Troubleshooting
Warning
•
Never remove the casing of this device.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
device, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips Web page (www.
philips.com/support). When you contact Philips,
make sure that the device is nearby and the
model number and serial number are available.
General
No power
•
Recharge your speaker.
No sound
•
Adjust volume on the speaker or the
Bluetooth-connected device.
•
Make sure that your Bluetooth device is
within the effective operational range.
No response from the speaker
•
Restart the speaker.
About Bluetooth device
The audio quality is poor after connection
with a Bluetooth-enabled device.
•
The Bluetooth reception is poor. Move the
device closer to this product or remove
any obstacle between them.
Cannot connect with the device.
•
The Bluetooth function of the device is not
enabled. Refer to the user manual of the
device for how to enable the function.
