Philips BSC431, Руководство пользователя

Страница: 14 / 61

3 Moisten your face with water and apply a cleanser to your face.
4 Place the brush head on your right cheek.
5 Press the on/off button once to switch on the appliance. The
appliance starts to operate at intensity setting 1. If you want to use
intensity setting 2, press the on/off button twice. Press three times
to switch off the appliance or wait until it switches off
automatically (Fig. 7).
6 Gently move the brush head across your skin from the nose
towards the ear (Fig. 8).
Tip: Do not push the brush head too hard onto the skin to make sure
the treatment remains comfortable.
7 The face can be divided in different zones. The intelligent skin
zone timer lets you know through a short pause when it is time to
move to the next skin zone (Fig. 9).
8 After 15-20 seconds, the appliance pauses briefly to let you know
that you have to move the appliance. Gently move the brush head
from left to right (Fig. 10). The appliance stops automatically after it
has completed the program for the entire face.
Note: We advise you to not overdo the cleansing and to not
cleanse any zone longer than 20 seconds.
9 After the treatment, rinse and dry your face.Your face is now ready
for the next step of your daily skincare routine.
10 Clean the brush head with water and mild soap and allow it to dry
properly.
Cleaning
Never use scouring pads, abrasive cleaning agents or aggressive
liquids such as petrol or acetone to clean the appliance.
Cleaning the appliance and the brush head
Make sure the appliance is switched off before you start cleaning it.
Rinse the appliance and the brush head thoroughly with water and
mild soap after each use, to ensure optimum performance.
1 Rinse the appliance and the brush head under the tap with warm
water and mild soap (Fig. 11) (max. 40ºC/104ºF).
14 English