Philips BRE610/00, Руководство пользователя

Страница: 9 / 38

1 To clean the epilating head, hold the appliance upside down,
switch it on and rinse it with cold water for 15 seconds after every
use (Fig. 21).
2
To clean the shaving head (if supplied): Use the cleaning brush to
brush away any hairs that have collected under the trimmers. Grab
the two trimmers of the cutting unit and pull the cutting unit out of
the shaving head (Fig. 22). Clean all parts of the shaving head with
the cleaning brush, except the foil.
Note: Lubricate trimmer teeth and foils with a drop of sewing
machine oil every six weeks for optimal performance.
3 Rinse the cutting unit, heads and accessories under the tap. Shake
them firmly to remove water drops.
4 Let all parts dry completely.
5 Place the cutting unit back into the shaving head ('click').
6 Put protection caps or combs on the heads to prevent damage to
the heads when you store them.
7 Store the appliance, its heads and accessories in the pouch.
Note: Lubricate trimmer teeth and foils with a drop of sewing machine
oil every six weeks for optimal performance.
Replacement
To buy accessories or spare parts, visit
www.shop.philips.com/service or go to your Philips dealer. You can
also contact the Philips Consumer Care Center in your country (see
the international warranty leaflet for contact details).
Shaving head (if supplied): For optimal performance, we advise you to
replace the cutting unit of the shaving head every two years. If you
use the shaving head twice or more times a week, replace the cutting
unit more often. Always replace the cutting unit with one of the
original type (CP0634/01).
Body exfoliation brush (if supplied): If you use the body exfoliation
brush 2-3 times a week, it lasts approximately 3 months. Replace the
body exfoliation brush every 3 months with one of the original type
(BRE394).
11
English