Philips BRE610/00, Руководство пользователя

Страница: 6 / 38

Attaching and detaching accessories
1 To attach an accessory, simply snap it onto the head ('click') (Fig.
6).
2 To detach an accessory, grab its front and back and pull it upwards
off the head (Fig. 7). To detach a comb, pull its back upwards with
a fingernail (Fig. 8).
Switching the appliance on and off
1
To switch on the appliance, press the on/off button once. Speed 2
is selected automatically and speed light II lights up (Fig. 9).
2 If you want to select speed 1, press the on/off button again. Speed
light I lights up (Fig. 10).
3 To switch off the appliance, press the on/off button once more.
The integrated light goes on automatically to give you a better view
while you use the epilating head (Fig. 11). If you want to switch off the
integrated light, keep the on/off button pressed for 3 seconds when
you switch on the appliance.
Epilating, shaving and trimming
The appliance is suitable for use in the bath or shower, but it can also
be used dry. If you want to use creams or body lotion, apply them
after you have used the appliance.
For gentle, less painful epilation, use the appliance on wet skin with
or without your regular shower gel.
Slight skin irritation like red skin or red dots may occur after epilation.
This is normal. We advise you to epilate before you go to bed at night,
as any redness or skin irritation usually disappears overnight.
Note: The appliance can only be used without cord.
1
When you epilate (with or without an accessory on the epilating
head), place the appliance on the skin at the angle shown in the
illustration (Fig. 12).
2 When you use the appliance with other heads and accessories
than the epilating head, make sure you place the heads and
accessories flat onto the skin (Fig. 13).
8
English