Philips BM90, Руководство пользователя

Страница: 25 / 28

23
EN
The audio quality is poor after connection
with a Bluetooth-enabled device.
• The Bluetooth reception is poor. Move the
device closer to this unit or remove any
obstacle between them.
Bluetooth cannot be connected with this unit.
•
The device does not support the profiles
required for this unit.
• The Bluetooth function of the device is
not enabled. Refer to the user manual of
the device to find out how to enable the
function.
•
This unit is not in pairing mode.
• This unit is already connected with another
Bluetooth-enabled device. Disconnect that
device and then try again.
The paired mobile device connects and
disconnects constantly.
• The Bluetooth reception is poor. Move the
device closer to this unit or remove any
obstacle between them.
•
Some mobile phones may connect and
disconnect constantly when you make
or end calls. This does not indicate any
malfunction of this unit.
•
For some devices, the Bluetooth
connection may be deactivated
automatically as a power-saving feature.
This does not indicate any malfunction of
this unit.
Timer does not work
•
Set the clock correctly.
• Switch on the timer.
Clock/timer setting erased
•
Power has been interrupted or the
power cord has been disconnected.
Reset the clock/timer.
Group connection failed
•
Move slave speakers closer to the master.
• You can only add slave speakers one by
one.
• You cannot group more than four speakers
with the master.
•
The master speaker may have switched to
single mode.
Occasional stuttering or breaking of music
streaming during group playback
•
If you experience music stuttering or
breaking of streaming, it could be that
your home Wi-Fi network is busy. Even
though Izzylink is independent from your
home Wi-Fi network, it uses Wi-Fi signals
to communicate between the speakers.
Try the following: 1) Reduce traffic on
your home Wi-Fi network, e.g. stop any
large file downloads or other content
streaming on your Wi-Fi network; 2)
Reboot the Master speaker, by unplugging
it from the mains and plugging it in again.