English
EN
33
Ad
ju
st
se
tt
in
gs
EasyLink Setup
1
Press
.
2
Select
[Settings]
, then press
OK
.
3
Select
[EasyLink Setup]
, then press
B
.
Video Setup
Advanced Setup
Audio Setup
Preference Setup
EasyLink Setup
One Touch Play
EasyLink
One Touch Standby
On
On
4
Select an option, then press
OK
.
5
Select a setting, then press
OK
.
To return to the previous menu, press
•
BACK
.
To exit the menu, press
•
.
Note
See the explanations of the above options in the
•
following pages.
[EasyLink]
Your Blu-ray disc player supports Philips
EasyLink, which uses the HDMI CEC
(Consumer Electronics Control) protocol.
EasyLink-compliant devices that are connected
through HDMI connectors can be controlled by
a single remote control.
[On]
•
– Enables EasyLink features.
[Off]
•
– Disables EasyLink features.
[One Touch Play]
When you press
PLAY
button, the TV (if
support one-touch play) and the Blu-ray disc
player will be turned on. Disc play starts if
there is a disc in the Blu-ray disc player and the
TV automatically switches to the correct
channel to show the video content.
[On]
•
– Enables one-touch play feature.
[Off]
•
– Disables one-touch play feature.
[One Touch Standby]
When you press and hold
STANDBY
button
on the remote control, this player and all the
connected HDMI CEC devices (if support
one-touch standby) switch to standby mode
simultaneously.
[On]
•
– Enables one-touch standby feature.
[Off]
•
– Only respond to the standby signal
from this player’s remote control.
Note
You must turn on the HDMI CEC operations on
•
the TV/devices before you can enjoy the EasyLink
controls. See the TV/devices manual for details.
Philips does not guarantee 100% interoperability
•
with all HDMI CEC compliant devices.
