20
EN
Sound
1
Press .
2
Select
[Setup]
>
[Audio]
to access the audio setup options.
#
[Night Mode]
: Select quiet or full dynamic sound. Night mode decreases the volume of loud
sound and increases the volume of soft sound (such as speech).
#
[Neo 6]
: Enable or disable a surround sound effect which is converted from 2.0 channel audio.
#
[HDMI Audio]
: Set an HDMI audio format when this player is connected through HDMI.
#
[Digital Audio]
: Select an audio format for the sound output when this player is connected
through a digital connector (coaxial).
#
[PCM Downsampling]
: Set the sampling rate for PCM audio output when this player is
connected through a digital connector (coaxial).
Note
#
For settings related to HDMI, the TV must be connected through HDMI.
#
Night mode is only available for Dolby encoded DVD and Blu-ray discs.
Network (installation, status...)
1
Press .
2
Select
[Setup]
>
[Network]
to access the network setup options.
#
[Network Installation]
: Start a wired or wireless installation to make the network work.
#
[View Network Settings]
: Display the current network status.
#
[View Wireless Settings]
: Display the current Wi-Fi status.
Preference (languages, parental control...)
1
Press .
2
Select
[Setup]
>
[Preference]
to access the preference setup options.
#
[Menu language]
: Select an onscreen display menu language.
#
[Audio]
: Select an audio language for video.
#
[Subtitle]
: Select a subtitle language for video.
#
[Disc Menu]
: Select a menu language for a video disc.
#
[Parental Control]
$*"@ Q{{{{W
"Q|W"
#
[Screen Saver]
: Enable or disable screen saver mode. If enabled, the screen enters idle mode
after 10 minutes of inactivity (for example, in pause or stop mode).
#
[Change Password]
$"@ Q{{{{W
not have a password or if you have forgotten your password.
#
[Display Panel]
: Change the brightness of the display panel of the player.
