Safety & Troubleshooting
Consult a service technician if the monitor does not operate normally when the operating
instructions given in this manual have been followed.
RETURN TO TOP OF THE PAGE
Installation Locations
●
Avoid exposure to heat and extreme cold
●
Do not store or use the product in locations exposed to heat, direct sunlight or extreme cold.
●
Avoid moving the product between locations with large temperature differences. Choose a
site that falls within the following temperature and humidity ranges.
❍
Temperature: 0-35°C 32-95°F
❍
Humidity: 20-80% RH
●
Do not subject the product to severe vibration or high impact conditions. Do not place the
product inside a car boot.
●
Take care not to mishandle this product by either knocking or dropping during operation or
transportation.
●
Do not store or use the product in locations where there is a high level of humidity or in dusty
environments. Do not allow water or other liquids to spill on or into the product.
RETURN TO TOP OF THE PAGE
file:///D|/My%20Documents/dfu/BDL_27/english/420wn6/SAFETY/SAFETY.HTM (2 of 2)2006-03-10 1:33:37 PM
