FACTORY ADJUSTED METHOD VER1.0
3-1
1. Color temperature adjustment
Push the factory service key to into the adjustment mode. The picture will appear as
follow
DVI
7180
º
k
X=308 Y=298
GAIN Bias
RGB RGB
XXX XXX
Use the AV key to select the color to adjust and
or
key to adjust the level.
The required equipments are CA-100,Vp300.
a. Adjust Bias first to let the Y be 0.4 on CA-100. Adjust R or B to let the value
of X,Y on CA-100 be the same as the value showing screen, The value of Y
should be Maintained 0.55 during the adjusting.
b. Move the cursor to adjust Gain. The value of Y should be adjusted to 35.
Then adjust R or B to let the value of X,Y on CA-100 be the same as the
value showing on screen. The value of Y should be maintain 20 during the
adjustment.
c. Repeat to check the Bias and Gain. The value of Y,X and Y should be the
same as the previous adjusted value. Then the DVI 7180
º
k mode is adjusted
completely.
d. Push the factory service key again to next picture. Then repeat the steps a.
b. c. to adjust.
e. If the adjustment is completed, repeat d. a. b. and c steps to adjust again.
f. When the last mode AV 10180
º
k is adjusted completely, push the factory
service key again to leave the adjustment mode,
Note: 1. There are 9 adjusted modes(DVIx3.RGBx3 Avx3)
2. The adjusted sequence is DVI
´
RGB
´
AV.
3. DVI: Bias Y=0.55
Gain Y=36
RGB: Bias Y=0.70
Gain Y=36
YPbPr : Bias Y=1.2
Gain Y=41
