Philips AZ1836, Руководство пользователя

Страница: 8 / 15

MP3-CD/ CD Player
2
Press
CD/USB
to enter CD mode if USB
is displayed.
➜
Display will show --- (See 2 ).
3 Open the disc door.
4 Insert a disc with the printed side facing up
and press the disc door gently to close.
➜
Display:The total number of tracks
appears.
➜
The disc scanning of MP3-CD may run
longer than audio CD.
5
Press
2;
to start playback.
➜
Display:
2
and the current track number.
For MP3-CD/ WMA only:
➜
The current track number “
XXX
“ and
album number “
ALB
XXX
“ will be
displayed interchangeably (See 4 5 ).
6 To pause playback press
2;
.
➜
Display:
2
and the current track number
flash.
7 Press
2;
again to resume playback.
8
To stop playback, press
9
.
Helpful hints:
The disc playback will also stop when:
– you open the disc compartment door;
– you select FM , MW or OFF position;
– the disc has reached the end of the playback.
Selecting a different track
• Press
∞
or
§
once or repeatedly until the
desired track number appears in the display.
For MP3-CD/WMA: First press
ALBUM+/- once or more to find your
album.
• In the pause/stop position, press
2;
to start
playback.
Finding a passage within a
track
1
During playback, press and hold down
∞
or
§
.
➜
The disc is played at high speed and low
volume.
2 When you recognize the passage you want,
release
∞
or
§
.
➜
Normal playback resumes.
Programming tracks
You may store up to 20 tracks in the desired
sequence. If you like, store any track more
than once.
1 In the stop position, press PROG to start
programming.
➜
Display shows P01 indicating the start
of
the program. PROG flashes. (See 6 )
2 Press
∞
or
§
to select your desired track
number.
For MP3-CD/WMA:
First press
ALBUM+/- once or more to find your
album.
3 Press PROG to store the desired track.
➜
Display shows P02 , indicating the next
program location available.
4 Repeat steps 2 to 3 to select and store all
desired tracks.
5 Press
2;
to play the program.
To review your program
In the stop position, press and hold
PROG
3 seconds.
➜
The display shows all the stored tracks in
sequence.
Helpful hints:
– Display shows
P01
if no track is
programmed.
– If you try to store more than 20 tracks, no
track can be stored and the display will show
FUL.
AZ1836_98_CCR 9/11/07 11:09 Page 8