Philips AZ1024, Руководство пользователя, Страница: 6 / 49

Playing a CD
• This CD player plays Audio Discs including
CD-Recordables (CD-R) and CD-Rewritables
(CD-RW).
• MP3, CD-ROM, CD-I, CDV,VCD, DVD or
computer CDs are not possible for playback.
IMPORTANT!
CDs encoded with copyright protection
technologies
by some record companies may
be unplayable by this product.
1 Adjust the Source selector to CD .
2 Open the CD door, and insert a CD with
the printed side facing up, then press the CD
door gently to close.
➜
Display shows
--
, and later the total
number of tracks. ( see
2
)
3 Press
2;
to start playback.
➜
PLAY/PAUSE LED lights up.
4 To pause playback, press
2;
.
➜
PLAY/PAUSE LED flashes.
5 To resume, press
2;
again.
6 To stop CD playback, press
9
.
Helpful hints:
CD play will also stop when:
– you open the CD door;
–
you select TUNER or OFF sound source;
–
the CD has reached the end.
Selecting a different track
•
Press
∞
/
§
SKIP
once or repeatedly until
the desired track number appears in the dis-
play.
• In the pause/stop position, press
2;
to start
playback.
Finding a passage within a
track
1 During playback, press and hold
∞
or
§
.
➜
The CD is played at high speed and with
reduced volume.
2 When you recognize the passage you want,
release
∞
or
§
to resume normal playback.
Helpful hints:
–
When your searching reaches the end of the
last track, the CD goes to stop mode.
Programming track num-
bers
You may store up to 20 tracks in the desired
sequence. If you like, store any track more
than once.
1 In the stop position, press PROG. to
activate programming.
➜
“
0
” flashes. ( see 3 )
➜
PROG LED also flashes.
2 Press
∞
or
§
to select your desired track
number.
3 Press PROG. to store the desired track
number.
➜
“ 0 ” flashes for you to program the next
track.
4
Repeat steps
2
to
3
to select and store all
desired tracks in this way.
➜
If you attempt to store more than 20
tracks, no track can be selected and the
display shows flashing
- -- -.
5 To play your program, press
2;
.
➜
PROG LED flashes during playback.
Helpful hints :
–
When playback of your program comes
to the stop position, your set will return
to normal playback.To re-enter program
mode, press PROG in the stop position.
CD Player
AZ1024_A 2007.7.27 17:00 Page 6