Playing a CD
•
This CD player plays Audio Discs including
CD-Recordables (CD-R) and CD-Rewritables
(CD-RW).
•
MP3, CD-ROM, CD-I, CDV,VCD, DVD or
computer CDs are not possible for playback.
IMPORTANT!
CDs encoded with
copyright protection
technologies
by some record companies may
be unplayable by this product.
1
Adjust the
Source selector
to
CD
.
2
Open the CD door, and insert a CD with
the printed side facing up, then press the CD
door gently to close.
➜
Display shows
--
, and later the total
number of tracks. (See
3
)
3
Press
2;
to start playback.
4
To pause playback, press
2;
.
➜
Display:
2
flashes. (See
4
)
5
To resume, press
2;
again.
6
To stop CD playback, press
9
.
Helpful hints:
CD play will also stop when:
–
you open the CD door;
–
you select
TUNER
or
TAPE/ OFF
sound
source;
–
the CD has reached the end.
Selecting a different track
•
Press
∞
/
§
once or repeatedly until the
desired track number appears in the display.
•
In the pause/stop position, press
2;
to start
playback.
Finding a passage within a
track
1
During playback, press and hold
22
or
11
.
➜
The CD is played at high speed and with
reduced volume.
2
When you recognize the passage you want,
release
22
or
11
to resume normal playback.
Helpful hints:
–
When your searching reaches the end of the
last track, the CD goes to stop mode.
Programming track num-
bers
You may store up to 20 tracks in the desired
sequence. If you like, store any track more
than once.
1
In the stop position, press
PROG
to activate
programming.
➜
Display:
PROG
and
00
flash. (See
5
)
2
Press
22
or
11
to select your desired track
number.
3
Press
PROG
to store the desired track
number.
➜
Display:
PROG
and
00
flash for you to
program the next track.
4
Repeat steps
2
to
3
to select and store all
desired tracks in this way.
➜
If you attempt to store more than 20
tracks, no track can be selected and the
display shows
-
--
-
.
5
To play your program, press
2;
.
Helpful hints :
–
When playback of your program comes
to the stop position, your set will return
to normal playback.To re-enter program
mode, press PROG in the stop position.
CD Player
AZ1022_05_Eng_CCR 6/23/08 16:15 Page 8
