Programming track numbers
In the STOP position, select and store your CD tracks in the desired
sequence. If you like, store any track more than once. Up to
20 tracks can be stored in the memory.
1.
Use the
SEARCH
∞
or
§
on the set, (for AZ 2025 model only:
on the remote control
¡
or
™
) to select your desired track number.
2.
Press
PROGRAM
.
™
Display:
PROGRAM
and the selected track number
Prog
appears briefly.
™
If you attempt to programme without first selecting a track
number,
no SEL
or
no Prog
scrolls across the display.
3.
Repeat steps
1-2
to select and store all desired tracks.
™
FULL
is displayed if you attempt to programme more than
20 tracks.
4.
To start playback of your CD programme, press
PLAY•PAUSE
2;
(for AZ 2025 model only: on the remote
control
2;
).
Reviewing the programme
In the STOP position or during playback, press and hold down
PROGRAM
for a while until the display shows all your stored track
numbers in sequence.
Erasing a programme
You can erase the programme by:
– pressing
STOP
9
once in the STOP position or twice during
playback.
•
no Prog
scrolls across the display briefly and PROGRAM
disappears.
– you select another source: TAPE / TUNER.
CD PLAYER
10
AZ 2025 /00
page
10
BATT
LOW
BATT
LOW
English
