CD PLAYER
9
1
Set the POWER slider to CD.
2
Press
/
OPEN to open the CD compartment.
3
Insert an audio CD (printed side up) and close the CD
compartment.
™
The CD player starts and scans the contents list of the CD.
Then, the CD player stops. Display indication: the total
number of tracks and the total playing time of the CD.
4
Press the PLAY·PAUSE
2;
button to start CD play.
™
Display indication: the current track number.
5
Press the STOP
9
button to stop CD play.
™
Display indication: the total number of tracks.
You can interrupt CD play by pressing PLAY·PAUSE
2;
. Continue
CD play by pressing the button again.
™
Display indication: the time of the actual position flashes.
Note: CD play will also stop if:
– you open the CD compartment,
– the end of the CD is reached, or
– you move the POWER slider to TUNER or TAPE.
If you make a mistake when operating the CD player, or the
CD player cannot read the CD, the display shows
Cd Err
. (See
chapter ”TROUBLESHOOTING”.)
If you press PLAY·PAUSE
2;
and there is no CD inserted the
display shows
no dISC
.
CD
CD
CD
CD
STOP
PLAY
PAUSE
SEARCH
CD
OPEN
Playing a CD
English
