RECORDING
11
English
GENERAL INFORMATION ON RECORDING
• Recording is permissible insofar as copyright or other rights of
third parties are not infringed.
• This deck is not suitable for recording on CHROME (IEC
II
) or
METAL (IEC
IV
) type cassettes. For recording, use NORMAL
type cassettes (IEC
I
) on which the tabs have not been broken.
• The best recording level is set automatically. Altering the
VOLUME
and
DBB
controls will not affect the recording in
progress.
• At the very beginning and end of the tape, no recording will
take place during the 7 seconds, when the leader tape passes
the recorder heads.
• To protect a tape from accidental erasure, have the tape in
front of you and break out the left tab.
Recording on this side is no longer possible. To record over this
side again, cover the tabs with a piece of adhesive tape.
SYNCHRO START CD RECORDING
1.
Select
CD
source.
2.
Insert a CD and if desired, programme track numbers.
3.
Press
STOP•OPEN
9/
to open the cassette door.
4.
Insert a suitable cassette into the cassette deck and close the
cassette door.
5.
Press
RECORD
0
to start recording.
– Playing of the CD programme starts automatically from the
beginning of the programme.
It is not necessary to start the CD
player separately.
6.
For brief interruptions press
PAUSE
;
. To resume recording,
press
PAUSE
;
again.
7.
To stop recording, press
STOP•OPEN
9/
.
To select and record a particular passage
•
Press
SEARCH
∞
or
§
. When you recognize the passage you
want, release
SEARCH
controls.
•
To interrupt CD playback press
PLAY/PAUSE
2;
(on the
remote control
2;
).
– Recording will begin from this exact point in the track when
you press
RECORD
0
.
AZ 1045/00
page
11
AZ 1045
CD RAD
IO CASS
ETTE RE
CORDER
VOLUME
RECORD
PLAY
SEARCH
STOP-OP
EN
PAUSE
DBB
POWER
TUNER
DYNAM
IC BASS
BOOST
CD
TAPE
OFF
PROG
BATT
LOW
MODE
STOP
PLAY•PA
USE
SEARCH
OR
PR
DIGITAL
TUNER
1