Erasing a programme
You can erase the programme by:
– pressing
STOP
9
once in the STOP position or twice during
playback. The display shows '
' briefly;
– pressing the CD door open;
– switching to TUNER/TAPE source.
CD player and CD handling
• The lens of the CD player should
never be touched!
• If the CD player cannot read CDs correctly, use a commonly
available cleaning CD to clean the lens before taking the set to
repair. Other cleaning methods may destroy the lens.
• Sudden changes in the surrounding temperature can cause
condensation to cloud over on the lens of your CD player.
Playing a CD is then not possible. Do not attempt to clean the
lens but leave the set in a warm environment until the
moisture evaporates.
• Always keep the CD compartment closed to avoid dust on the
lens.
• To take a CD out of its box, press the centre spindle while
lifting the CD. Always pick up the CD by the edge and return
the CD to its box after use to avoid scratching and dust.
• To clean the CD, wipe in a straight line from the centre
towards the edge using a soft, lint-free cloth. Do not use
cleaning agents as they may damage the disc.
•
Never
write on a CD or attach any stickers to it.
PLAYING A CASSETTE
1.
Select
TAPE
source.
™
The display shows
throughout tape operation.
2.
Press
STOP•OPEN
9/
to open the cassette door.
3.
Insert a recorded cassette and close the cassette door.
4.
Press
PLAY
1
to start playback.
5.
To interrupt playback, press
PAUSE
;
. To resume, press the
key again.
6.
By pressing
SEARCH
5
or
6
on the set,fast winding of the
tape is possible in both directions.
7.
To stop the tape, press
STOP•OPEN
9/
.
–
The keys are automatically released at the end of the tape and
the
indication goes out, except if
PAUSE
;
has been
activated.
CD PLAYER
CASSETTE RECORDER
10
English
AZ 1045 /00
page
10
PROG
BATT
LOW
MODE
STOP
PLAY•PA
USE
SEARCH
P
DIGITAL
TUNER
AZ 1045
CD RAD
IO CASS
ETTE RE
CORDER
VOLUME
RECORD
PLAY
SEARCH
STOP-OP
EN
PAUSE
DBB
POWER
TUNER
DYNAM
IC BASS
BOOST
CD
TAPE
OFF
X
