Philips AWP9820, Руководство пользователя, Страница: 18 / 72

Note:
If it’s installed before a washing machine or a dishwasher, it’s recommended to
check if re�ll is needed during the annual maintenance check. If it’s installed
before a water heater, it’s recommended to check if re�ll is needed every 3-6
months. The re�ll model code is AWP183.
VI. Precautions
- The inlet water temperature should be 5-38
℃
, the inlet water pressure
should be 0.1-0.4 MPa, otherwise the product may be damaged. When
the inlet water pressure exceeds 0.4 MPa, a pressure relief valve should
be installed before the product. The pressure relief valve needs to be
purchased separately.
- Always use municipal tap water as the water source. Do not use water
that is microbiologically unsafe or of unknown quality without adequate
disinfection before or after the product.
- Please turn off the water supply if the it will not be used for an extended
period.
- Under no circumstances should the product be installed outdoors.
VII. Troubleshooting
Problem Possible cause Solution
No water comes out.
Water leaks from the
connections.
Water leaks from the
bottom cap.
The �ow gets slower.
There is noticeable
scale build-up.
A new bag of antiscalant.
Re�ll is needed.
Cold water valve is turned
off.
Re�ll is needed.
The nut is not tightened.
The gasket is missing.
The gasket is worn.
Tighten the bottom cap.
Ensure there is a gasket.
Contact consumer care.
The bottom cap is not tight-
ened.
The gasket is missing.
The gasket is worn.
The cold water valve is not
fully turned on.
The stainless steel mesh is
clogged.
Re�ll is needed.
Turn on the cold water valve.
Clean the stainless steel
valve.
A new bag of antiscalant.
Turn on the cold water
valve.
A new bag of antiscalant.
Tighten the nut with a
wrench.
Ensure there is a gasket.
Contact consumer care.
14