Philips AVENT SCD831, Руководство пользователя

Страница: 29 / 316

- English 27 -
NOISE/SOUND
Why don’t I hear a
sound? Why can’t I hear
my baby cry? Why do I
experience only partial
sound transmission but
not all?
The volume of the parent unit may be set too low or may be switched off.
Press the top part on the control button to increase the volume level�
Perhaps the parent unit is muted, unmute the device by pressing the top
part of the control button and adjust the volume�
The sensitivity is set too low, adjust the sensitivity in the parent unit's
menu to a higher level�
The baby unit may be too far away from your baby� Make sure the
baby unit is not further than 1�5 meters/ 5 feet away from your baby
for optimal sound detection� Closer than 1 meter /3�5 feet increases
strangulation hazard�
Why does the parent unit
react too quickly to other
sounds than my baby
makes?
The baby unit also picks up other sounds than those of your baby� Move
the baby unit closer to the baby (but observe the minimum distance of
1 meter/ 3.5 feet).
The sensitivity level may be set too high� When your baby makes soft
sounds, the sensitivity has to be higher. However, the louder your baby
sounds, the lower the sensitivity level can be set. You can change the
sensitivity of your baby monitor on the parent unit's menu�
Why does the parent unit
make a buzzing sound?
Interference may occur when the parent unit is out of range of the baby
unit� Interference may also occur if there are too many walls or ceilings
between the parent unit and the baby unit or when other 2.4 GHz
wireless devices are switched on (e.g. microwave, Wi-Fi router).
Put the parent unit in a different place, closer to the baby unit, or switch
off other wireless devices.
If this answer does not help you, check the other FAQ on " Why does the
parent unit and/or baby unit produce a high-pitched noise?"
How long will the lullaby
song be played by the
baby unit?
Once you select a lullaby, it will be continuously repeated for
approximately 15 minutes. In case you want to play all songs that are
available, select the last option in the lullaby list.
How can I increase the
volume of the lullaby?
You can adjust the volume of the lullaby on the parent unit, not on the
baby unit� Press the lullaby button on the parent unit to open the lullaby
menu and adjust the volume�