Philips AVENT SCD603H, Руководство пользователя

Страница: 17 / 25

17
Output video display
Why does the video display flicker?
• interference may occur when the parent unit is
out of range of the baby unit. interference may
also occur if there are too many walls or ceilings
between the parent unit and the baby unit or
when other 2.4ghz wireless devices
are turned on (e.g. microwave, Wi-Fi router).
Put the parent unit in a different place, closer to
the baby unit, or turn off other wireless devices.
• The rechargeable battery of the parent unit
may need to be charged.
Why isn’t there any image on the video display
when the battery/power-on light is on?
•
The parent unit may be in the voice activation
mode. Press the voice activation button again
to turn on the video display.
Why isn’t the image on the video display clear?
• The display brightness may be set too low.
increase the display brightness (see chapter
‘Features’, section ‘Adjusting display brightness’).
•
Perhaps you did not remove the protective
foil from the video display. Remove the
protective foil.
Why doesn’t the parent unit work in the voice
activation mode?
•
The distance between the baby and the baby
unit may be too large to pick up sounds from
the baby. Make sure that the baby unit is placed
1 to 1.5 meters (3.5 to 5 feet) away from
the baby.
Why isn’t the image on the video display clear
in night vision?
•
The distance between the baby and the baby
unit may be too large. Make sure that the
baby unit is placed 1 to 1.5 meters (3.5 to
5 feet) away from the baby.
EN
g
Li
Sh