Philips AVENT SCD505, Руководство пользователя

Страница: 7 / 201

8
Set up the baby unit
You can connect the baby unit to the mains or
insert non-rechargeable batteries to operate it.
For added reassurance, insert non-rechargeable
batteries to guarantee a backup in case of
power supply failure.
1
Before you connect the baby unit to
the mains socket, remove the lid of the
battery compartment.
2
Insert four non-rechargeable 1.5V R6 AA
batteries with the correct polarity (+/-) as
indicated.
3
Reattach the lid.
4
Connect a supplied adapter to the baby
unit and to the mains socket.
4 Get started
Charge the parent unit
Note
Make sure that the parent unit is disconnected
•
from the mains and turned off.
1
Remove the lid of the battery compartment.
2
Insert the supplied rechargeable batteries
with the correct polarity (+/-) as
indicated.
3
Reattach the lid.
4
Connect a supplied adapter to the parent
unit and to the mains socket to start
charging.
During charging, the battery indicator
»
flashes green.
Tip
The rechargeable batteries only reach the full
•
capacity after you charge them for four times.
For the first 4 times, the charging time is 10 hours,
•
and the operating time is less than 24 hours.
The normal charging time is 8 hours, and the
•
normal operating time is 24 hours.
EN