9
English
4 Get started
You can connect the parent unit or the baby
unit to the mains or insert batteries to operate
it. For added reassurance, insert batteries to
guarantee a backup in case of power supply
failure. If you use rechargeable batteries, make
sure that you charge them separately.
To set up the baby unit
:
1
Before you connect the baby unit to the
mains socket, remove the lid of the battery
compartment.
2
Insert four 1.5V R6 AA batteries with the
correct polarity (+/-) as indicated.
3
Reattach the lid.
4
Connect a supplied adapter to the baby
unit and to the mains socket.
To set up the parent unit
:
1
Follow the same procedure as you do to
set up the baby unit.
Baby unit (Fig. 2)
a
•
Press to turn the baby unit on or off
b
on
•
In green: The baby unit is turned on.
c
Microphone
d
•
In green: The baby unit is turned on.
• In red flashing: The batteries are low in
power.
e
Connector for the supplied AC/DC
adapter
f
Lid of battery compartment
g
Four 1.5 V R6 AA batteries (not included)
h
1 channel 2
•
Switch to Channel 1 or Channel 2
i
Battery compartment
j
AC/DC adapter, with the same type as
the one for the parent unit
EN
