Philips AVENT Premium Plus, Руководство пользователя

Страница: 19 / 78

19 English
Before using the bottle
- Inspect the bottle and feeding teat before each use and pull the feeding teat in all directions to prevent a choking
hazard. Throw away at the first signs of damage or weakness.
- Clean and disinfect the bottle before first use and after every use (see 'Cleaning and disinfecting').
Assembling the bottle
1. The teat is easier to
assemble if you move it
back-and-forth while pulling
it upwards instead of pulling
it up in a straight line. 2. Make sure you pull the
teat through until its lower
part is aligned with the
screw ring. 3. Make sure you place
the cap vertically onto the
bottle so that the teat sits
upright. 4. Screw the screw ring with
teat and cap on the bottle.
5. To remove the cap, place
your hand over the cap and
your thumb in the dent of
the cap.
Heating breast milk
If you use frozen breast milk, let it defrost completely before you heat it.
Note: If you need to feed your baby quickly, you can defrost the milk in a bowl of hot water.
Heat the bottle with defrosted or refrigerated breast milk in a bowl of hot water or in a bottle warmer. Remove the screw
ring and sealing disc from the bottle.
Warning: It is not recommended to use a microwave to warm up breast milk. Microwaves might
alter the quality of breast milk and destroy some valuable nutrients and may produce localized high
temperatures. If you heat up breast milk in the microwave, only place the container without screw ring,
teat and cap in microwave. Always stir heated breast milk to ensure even heat distribution and check
the temperature before serving.
English