Power supply
•
Connect the supplied power adapter to the
set's DC 9V socket and to the power socket.
Helpful hints:
To avoid damage to the set, use only the
adapter supplied!
The type plate is located on the bottom
of the set.
Setting OSD (On Screen
Display) language
1
Press
MENU
.
➜
The menu appears.
2
Press
1 2
to highlight “
General
”.
3
Press
4
to highlight “Language”.
4
Press
1 2
to select desired language.
5
After finishing the setting, press
CLOCK
,
TUNER
,
PHOTO/VIDEO
or
MUSIC
to
exit the setup menu.
Setting time and date
1
Press
CLOCK
.
2
Use
MENU
.
3
Use
3 4 1 2
to select a field of “Time
Set” and “Date (Year-Month-Day)”.
4
Press
OK
to confirm.
5
Press or hold down
3 4
to set the values.
6
Press
OK
to confirm.
7
Repeat Steps 3-6 to set other values of
“Time Set and “Date (Year-Month-Day)”.
8
After finishing the setting, press
CLOCK
,
TUNER
,
PHOTO/VIDEO
or
MUSIC
to
exit the setup menu.
To change time format
1
In the Clock menu, press
3 4
to select the
value of “12/24 Hour Format”.
2
Press
1 2
to toggle between 12H and 24H.
Note:
When the set is disconnected from the power
outlet for about 5 minutes, you need to reset the
time and date.
Setting and activating alarm
You can set two different alarm times.
1
Press
CLOCK
.
2
Press and hold
ALARM 1
or
ALARM 2
.
➜
The hour digits flash.
3
Press or hold down
3 4
to set hour.
4
Press
ALARM 1
or
ALARM 2
to confirm.
➜
The minute digits flash.
5
Press or hold down
3 4
to set minute.
6
Press
ALARM 1
or
ALARM 2
to confirm.
7
Press again
ALARM 1
or
ALARM 2
to
activate alarm setting.
➜
When alarm is activated,
is displayed.
➜
At the set alarm time, the alarm will sound
and its volume will increase gradually.
Selecting alarm mode
1
Press
MENU
.
➜
The menu appears.
2
Use
1 2
to highlight “Clock”.
3
Press
34
to select “Alarm Music”.
4
Press
1 2
to select specific music you like.
➜
Alarm will go off with the music you select.
Switching off the alarm
There are three ways of switching off the
alarm. Unless you choose to cancel the alarm
completely, the DAILY ALARM RESET option
will be automatically kept activated from the
time your alarm first goes off.
call at the same time for the following day:
Daily alarm reset
If you want the alarm to be stopped
immediately but also wish to repeat the
alarm
Power supply/Basic operation
Alarm
•
During the alarm call, press
ALARM 1
or
ALARM 2
.
➜
is displayed.
Repeat alarm
This will repeat your alarm call at 9-minute
intervals.
•
During the alarm call, press
REPEAT ALARM /
BRIGHTNESS CON-
TROL
.
➜
flashes.
Switching off the alarm completely
•
Press repeatedly
ALARM 1
or
ALARM 2
until
is changed to
.
➜
When alarm is deactivated,
is dispalyed.
Helpful hints:
During alarm call, if no button is pressed, alarm
call will last 30 minutes.
Tuner
Tuning to radio station
1
Press
TUNER
to switch on radio (FM only).
2
Press and hold
1 2
for about 2 seconds,
then release.
➜
The radio automatically tunes to a station
of sufficient reception.
3
Repeat step 2 if necessary until you find the
desired station.
•
To tune to a weak station, press
1 2
briefly
and repeatedly until you have found optimal
reception.
Turning on/off radio
•
To turn off radio, press
OK
. To turn on radio,
press
OK
again.
To improve reception:
FM: Extend and adjust the pigtail for optimum
reception.
Programming radio stations
You can store up to a total of 20 FM radio
stations in the memory, manually or automat-
ically (Auto store).
Manual programming
1
Tune to your desired station (See “Tuning to
radio station”).
2
Press and hold
TUNER
for about 2 sec-
onds, then release.
➜
Preset number will flash.
3
Press
34
once or more to allocate a
number from 1 to 20.
➜
Preset number will flash.
4
Press
TUNER
again to confirm.
5
Repeat steps 1-4 to store other stations.
Note:
– You can erase a preset station by storing
another frequency in its place.
Auto store
Autostore automatically starts programming
radio stations from preset 1. Any previous
presets e.g. manually programmed will be
erased.
1
In TUNER mode, press
MENU
to display
tuner menu.
2
Press
4
to select “Tuner Auto Program”.
3
Press
OK
.
➜
Available stations are programmed (FM).
After all stations are stored, the first auto-
store preset station will then automatically
play.
To listen to a preset or autostore
station
Press
34
once or more until the desired
preset station is displayed.
Digital tuner
ifu_ajl308_eur_eng_37 7/28/08 16:58 Page 4
