RADIO
You can use this set solely as a radio!
1
Adjust
RADIO
OFF
/
ON
to
ON
to switch on the radio.
2
Select your waveband by adjusting the
BAND
switch.
3
Adjust
TUNING
to tune to your desired station.
4
Turn the
VOLUME
control to adjust the volume level.
5
Adjust
RADIO
OFF
/
ON
to
OFF
to switch off the radio.
To improve reception:
FM:
extend and position the pigtail for optimum reception.
AM:
uses a built-in aerial inside the set. Direct the aerial by adjusting the
position of your set.
SETTING THE CLOCK AND ALARM TIMES
The time is displayed using the 24-hour clock
IMPORTANT!
To adjust the clock and alarm times accurately, always make sure
you press the
7
or
∞
buttons separately and not simultaneously.
1
Turn the
clock control
to
SET TIME
or
SET ALARM 1
or
SET ALARM 2
to
set the clock or alarm time respectively.
2
Press
7
or
∞
repeatedly or hold down on the respective button to adjust the
hours and minutes.
3
Release
7
or
∞
when you reach the correct setting.
4
After you have set both the hour and minutes, turn the
clock control
to
CLOCK
to run on clock time.
SELECTING THE ALARM MODE
GENERAL
If you wish to use the alarm, you must first set the alarm time first. You can choo-
se from two different alarm modes to wake you up: by radio or buzzer.
• Select your choice of alarm mode by adjusting
ALARM 1
or
ALARM 2
to
RAD
or
BUZ
.
™
The 2 buzzers are at a set volume and cannot be adjusted.
BUZ
on
ALARM 1
is a low tone buzzer while
BUZ
on
ALARM 2
is a high tone.
