Philips AirStar FC8270, Руководство пользователя

Страница: 11 / 28

Troubleshooting
This chapter summarises the most common problems you could encounter with the appliance. If
you are unable to solve the problem with the information below, contact the Consumer Care
Centre in your country.
Problem Possible cause Solution
The suction
power is
insufficient.
The dust container is full. Empty the dust container.
The filter cylinder is dirty. Clean the filter cylinder (see chapter
‘Cleaning’).
The Clean Air HEPA outlet
filter is dirty.
Replace the Clean Air HEPA outlet filter (see
chapter ‘Replacing the Clean Air HEPA outlet
filter).
The suction power slide on
the handgrip is open.
Close the suction power slide.
Specific types only: the
electronic suction power
control is set to a low
setting.
Set the electronic suction power control to a
higher setting.
The nozzle, tube or hose
may be blocked.
Disconnect the blocked-up item and connect
it (as far as possible) the other way around.
Switch on the vacuum cleaner to force the air
through the blocked-up item in opposite
direction.
English
11
4222.003.3542.1.indd 11 13-07-10 11:00