Philips AG1000 Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 73

Philips AG1000 Скачать руководство пользователя страница 24

VII. Maintenance and

transport

. [also

see repair p20

]

As is customary with every mechanism, different points must also be

lubricated

here in order to ensure

proper functioning. This is particularly recommended for intensive use. To ensure reliable lubrication,
the amalgamators used in the manufacture are included in the list of parts. These lubricants are suitable
for every clinic.

NO OIL OR FAT ON THE BETWEEN!

Do not spill with oil and grease and make sure that neither oil nor grease gets on the rubber of the
intermediate wheel or on the part of the motor shaft that comes into contact with this wheel. Oil and
grease deform the rubber, ensuring correct operation

...

………

correct operation of the changer would be affected

.

When transporting the separate unit, as well as when transporting the cabinet, some precautionary
measures must be taken to avoid unnecessary damage. To do this, remove the center pin and prevent
the plate press from sliding up and down in the slot.

The P.U.arm should be fixed to the starting /rest position and it is recommended, the rubber drive
wheel

transport over large distances in the original way, so that no damage to the rubber is to be possible.

Finally, it is of course the best when the separate unit is transported in its original packaging.

In cases where the changer is installed, the unit must be screwed onto the mounting plate in the same
way as on delivery.

......................................................................................................................

.....................................................................................

P10b

VIII REPAIR

The

exploded view drawings

clearly show how the various components must be assembled

P11a

24

«
...
22
23
24
25
26
...
»

Содержание AG1000










































































Отзывы:

Нет отзывов