6
EN
4 Product
information
Note
•
Product information is subject to change without prior
notice.
Specifications
Amplifier
Output Voltage
1000 mV RMS
Signal to Noise Ratio
> 62 dBA
Total Harmonic Distortion
< 2 %
Bluetooth
Standard
Bluetooth Standard Version
2.1+EDR
Frequency Band 2.402~2.480 GHzISM Band
Range
10m (free space)
General information
AC Power
Model: AS030-090-
EE033 (Philips);
Input: 100-240 V ~,
50/60 Hz, 0.15 A;
Output: 9 V 0.33 A
Operation Power
Consumption
< 3 W
Dimensions - Main Unit
(W x H x D)
74 x 28 x 72 mm
Weight - Main Unit
0.04 kg
5 Troubleshooting
Warning
•
Never remove the casing of this device.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
device, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips Web page
(www.philips.com/support). When you contact
Philips, make sure that the device is nearby
and the model number and serial number are
available.
No power
•
Make sure that the AC power adapter is
connected properly.
•
Make sure that there is power at the AC
outlet.
No sound from your Hi-Fi system
•
Check if the Hi-Fi system is connected to
power.
•
Make sure that the system is connected
with the Bluetooth adapter properly.
•
Make sure that the Bluetooth wireless
connection is successful.
•
Adjust the volume of your system and
Bluetooth device.
•
Make sure that the Hi-Fi system is in
Audio-in or line-in mode.
About Bluetooth device
The audio quality is poor after connection
with a Bluetooth-enabled device.
•
The Bluetooth reception is poor. Move the
device closer to the Bluetooth adaptor or
remove any obstacle between the device
and the adaptor.
