Problem
–
Possible cause
• Remedy
No sound /power
–
Volume not adjusted
• Adjust the
VOLUME
.
–
Power cord not securely connected
• Connect the AC power cord properly
–
Batteries dead/ incorrectly inserted
• Insert (fresh) batteries correctly
–
Headphones connected to the set
• Disconnect headphones.
Poor radio reception
–
Weak radio signal
• For
FM
, extend, incline and turn the telescopic
antenna for best reception. Reduce its length if
the signal is too strong.
• For
MW
, the set uses a built-in antenna. Direct
this antenna for best reception by turning the
whole set.
Display does not function properly / No
reaction to operation of any of the controls
–
Electrostatic discharge
• Switch off and unplug the set. Reconnect after a
few seconds.
Troubleshooting
If a fault occurs, first check the points listed below before taking the set for repair.
If you are unable to remedy a problem by following these hints, consult your dealer or service centre.
WARNING
:
Do not open the set as there is a risk of electric shock. Under no
circumstances should you try to repair the set yourself, as this will invali-
date the guarantee.
Disposal of your old product
Your product is designed and manufactured with high quality materials
and components, which can be recycled and reused.
When this crossed-out wheeled bin symbol is attached to
a product it means the product is covered by the
European Directive 2002/96/EC.
Please inform yourself about the local separate collection system for electrical
and electronic products.
Please act according to your local rules and do not dispose of your old products
with your normal household waste.The correct disposal of your old product will
help prevent potential negative consequences for the environment and human
health.
AE2730_12_A_CCR 2008.6.24 10:00 Page 8
