User Manual BDL5535VS, Addendum to User Manual BDL5530EL
4
Connecting a PC
Connecting to an external PC:
1. Connect the provided DVI cable to the open DVI port on the grey rendering box at the backside of the
display and to a PC with the following minimum requirements:
•
2 GHz processor,
•
an NVidia or AMD/ATI graphics card (not combined with other type of graphics chips), resolution
1920x1080,
•
DVI, HDMI or DisplayPort output (for the latter 2 a converter plug is not included),
•
Windows XP or Windows 7 (preferred).
2. Audio can be connected as described in the BDL5530EL manual. For accessing some audio inputs it may
be required to temporarily shift the additional power supply, connect the audio plug and reposition the
power supply.
3. Install the Dimenco 3D Player and Control Tool that can be downloaded from:
ftp://ftp.dimenco.eu/
User: DimencoSoftware
Password: playeranddct
Manuals for the Dimenco 3D Player and Control Tool can be downloaded from the same ftp.
4. Optionally download some sample clips from:
ftp://ftp.dimenco.eu/
User: Dimencoguest
Password: 3dconversion
5. Play out the content with the Dimenco Player and control the visualization settings with the Control Tool.
In case there are problems with either the Dimenco 3D Player or Control Tool, please refer to the respective
manuals.
A very important note:
The grey rendering box attached to the back of the display is specific for the panel and cannot be
interchanged for a rendering box of another display (even with the same product number).
For this
reason the rendering box has a serial number that is also mentioned on a label (positioned at the red area in the
picture below) on the backside of the display.