Philips ACC8160, Руководство пользователя

Страница: 9 / 32

9 EN
Installation
When installing one or more new WLAN adapters to your
network, you can set it up in one of two ways:
• Use the DHCP service on your network to assign IP addresses
to each WLAN adapter.

Installation using DHCP, p. 9.
• Set the device to a default IP address to access the configura-
tion interface and assign a fixed IP address.

Installation using
the factory default IP address, p. 10.
Installation using DHCP
If your network has a DHCP server, follow the steps below to
install new WLAN adapters:
1
Make a note of the MAC address of every device that you
are about to install (The MAC address can be found on the
bottom plate of the device).
No power
Connection OK
File transfer
Booting / IP search
No access rights
No connection
Error
MAC A1:B2:C3:1A:2B:3C
Default: DHCP, user name: ---
password: administrator
2
Configure your DHCP server to assign an IP address to each
device. Refer to the documentation of your DHCP server for
more information.
3
Deploy the devices throughout your organization.
4
Slide a Pocket Memo dictation recorder 9600 or 8000 series
into the docking slot of the docking station.
OFF
ON
5
When using a Pocket Memo dictation recorder 9600
series, press and hold the RIGHT SMART button and
the
MENU
button on the recorder simultaneously for 3
seconds.
When using a Pocket Memo dictation recorder 8000 series,
press and hold the
F3
and the
+
button on the recorder
simultaneously for 3 seconds.
X The current configuration settings of the WLAN adapter
are displayed on the recorder’s screen.
WLAN ADAPTER
IP ADDRESS:
192.168.XXX.XXX
MAC ADDRESS:
A1:B2:C3:1A:2B:3C
English