7
EN
Note
•
When it is set to a higher sensitivity, the purifier starts
cleaning the air at lower pollution levels to make the
air even cleaner. Plug the purifier before adjusting the
sensitivity of the air quality sensor.
1
Press and hold the
and
button
simultaneously for 3 seconds.
»
The purifier beeps and one of the
lights (
, or
) goes on to show
the current sensitivity level of the air
quality sensor.
Timer light Sensitivity level
extra sensitive
sensitive
standard
2
Press the
button to adjust the
sensitivity level of the air quality sensor.
»
One of the
lights (
,
or
) goes on to show the preferred
sensitivity level of the air quality sensor.
3
Press and hold the
and
button
simultaneously for 3 seconds to save the
selected level.
»
The purifier beeps to indicate your
adjustment is saved.
Note
•
When you change the sensitivity, the purifier
automatically starts operating at the set sensitivity level
whenever you switch on the purifier.
Tip
•
In the sensitivity setting mode, make sure you press
the
button within 10 seconds, otherwise, it will
automatically save the last setting.
Auto mode
After choosing the auto mode (
), the
built-in air quality sensor automatically measure
the ambient air quality. The appliance selects the
most appropriate fan speed for the measured
air quality.
Select the fan speed
You can select the desired fan speed.
Note
•
When you select a fan speed, you can also use the
timer function (see section "Set the timer"). In this case,
one of the lights (
, or
) and the HOUR light (
, , or
) are on.
1
Press the
button to switch on the
purifier.
2
Press the
button once or more times
to select the desired fan speed (
, or
).
Eco mode
In the eco mode (
), when the air is clean
and the air quality light is in blue for more than
Содержание AC4005
Страница 2: ......
